Alternative flash content

Requirements

CLICK HERE TO SEE THE SALE!

Kayak Domain Motor and Sail Catamarans

 

SquireCat:Motor

Squire equals 

Squire plus

Squire equals

 SquireCat:Motor

Outboard motor and other accessories are optional extra.

 

Sample video of FUN and PLAY;

 More videos at our Youtube Channel: http://www.youtube.com/kayakdomain

 

 

 

 

 

SquireCat:Sail

Squire Kayak

Squire Kayak

 Squire Equals

This prototype SquireCat:Sail version 2 below is for SALE at P99,900. And this is READY TO GO!!!. You can dismantle all parts and load it in your vehicle (at least a Starex or a pickup truck like Nissan Navara) and transport to your destination and assemble it on site at the beach. The cost of materials of building this prototype is over P110,000. The man-hours labor cost isn't even computed.

List of Materials;

- 2 x Brand New Squire Kayak
- Mainsail (5.5 sqm polytarp)
- Sail mast (tapered round fibre-glass)
- Boom (G316 Stainless Steel tube 40mm dia.)
- Lateral Frame (G316 Stainless Steel tube 50mm dia.)
- Cross Frame or spar (G.I. Pipe schedule 20, 40mm dia.)
- Aluminium
- Angle bar (G304 Stainless steel 40mm x 40mm)
- Angle bar (G304 Stainless steel 20mm x 20mm)
- Rudder & Dagger board (New Zealand Pine)
- Pulley Blocks
- Sheets (6mm polyropes)
- Rope Cleats (G316 Stainless steel)
- Saddle (G316 Stainless steel)
- Eye bolt (10mm Zinc/G.I.)
- Assorted Nuts, Bolts & Washers (stainless steel & G.I.)
- Welding rods (stainless steel)

SquireCat:Sail

 

 

 

Squire Kayak Catamaran Sail version 3.

 Squire Kayak Catamaran Sail version 3

 

 

 

FOR BRAND NEW CATAMARAN KIT:

Sail, Mast and other accessories are optional extra. Note that, we can design a Mainsail and Jib for you using a computer software. The computer designed sails will then be hand plotted and cut. And then sewn using a heavy duty zig-zag sewing machine. We use an Australian Made "Wall Wrap" which is lighter, more rigid and stronger than a domestic Polytarp. The "Wall Wrap" is UV stabilized, high water barrier, low flammability, and moisture resistant. We use V92 (Metric 25) thread for sewing, the same thread used by commercial sail makers.

 

Sample video of FUN and PLAY;

 More videos at our Youtube Channel: http://www.youtube.com/kayakdomain

 

Kayak Domain Sail options are made to order. We are using an Australian made wallwrap. This wallwrap is higher strength, light weight, less stretch, better UV protection and about the same price as a domestic Polytarp. Our KD sail is sewn using V92 (metric 25) thread, the same thread used by most commercial sail maker. The corners of a KD sail is reinforced with a 25mm (1") webbing for added strength. A Cloth tape is sewn on the hems (leech and foot edges) for added strength against tear.  These sail sizes are ideal for small boats that range from 3m (9.8ft) up to 5.5m (18ft). 8500, 11400, 13600, 1290psqm


 

 

 

 

 

 

 

ROVER Kayak Catamaran with Motor or Sail are also available.

 RoverCat:Motor

 

Rover Kayak

Rover Kayak

Rover Kit

Rover Kayak Catamaran Motor version 1

 Rover Kayak Catamaran Motor version 1

 

 

Related Catamaran Products

 

 

Pulley Block

-- P200 + VAT each

Pulley Block

 

 

 

KayakDomain Roller Furler

-- P3,800 + VAT each

KD Roller Furler

 

 

2nd Skin Gloves (Size 7 & 8 only)

This 2nd Skin Gloves are similar to a widely used gloves in yachting (like the America's Cup) and paddling competition. It protects you from rope burns, paddling blisters, and similar.

-- P400 + VAT a pair

2nd Skin Gloves

 

 

 

Axial Thrust Ball Bearing (sizes: 6mm x 12mm x 4.5mm  or  8mm x 16mm x 5mm)

Replacement thrust ball bearing for your Roller Furler.

--- P120 + VAT each

Axial Thrust Ball Bearing

 

 

 

Wire Rope Thimble

For boat and balustrade rigging. Suitable for 2.4mm - 3.2mm diameter wire ropes.

--- G316 Marine Stainless Steel 3mm P85 + VAT each

--- G304 Stainless Steel 3mm P75 + VAT each

Stainless Steel Thimble

 

 

 

Wire Rope Grip

For boat and balustrade rigging. Suitable for 2.4mm - 3.2mm diameter wire ropes.

--- G316 Marine Stainless Steel 3mm P180 + VAT each

--- G304 Stainless Steel 3mm P130 + VAT each (out of stock)

Wire Rope Grip

 

 

 

Contact us for details.

 

 

Best regards,

Kayak Domain

Additional information